Vitek VTC-IRE40 Especificaciones descargar pdf (Pagina 13)

6.5 DAY/NIGHT menu

To enter DAY/NIGHT menu, press ● button at MAIN menu-1>DAY/NIGHT.

IMPORTANT ACTIVITY!!!

DAY->NIGHT and NIGHT->DAY operations must be examined and verified at the final

installation.

Block the lens for a few seconds for NIGHT mode then release and let it return to DAY mode.

If camera stays at NIGHT mode for more than 10sec, slightly decrease NIGHT→DAY THRES and

repeat the fore-mentioned steps.

If the scene is too dim or lens iris was adjusted too low (near close), it may not return to DAY.

DAY/NIGHT

Default

Descriptions

OPTIMIZER

OFF

IR OPTIMIZER feature can reduce the over-saturation in video caused by the

narrow emitting IR LEDs

OFF – Disables IR OPTMIZER.

ON – Enables IR OPTIMIZER.

MODE

AUTO

There are two modes available by how to manage IR OPTIMIZER.

AUTO – Reducing the over-saturation is automatically adjusted along with the

location of the subject.

CENTER – Center area is prioritized to reduce the over-saturation.

Over-saturation in the side area could be ignored.

LEVEL

015

Overall brightness is adjusted when IR OPTIMIZER is working.

High value in LEVEL increases the brightness but the over-saturation could

occur.

Low value in LEVEL decreases the brightness and the dim area could be

darker.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sin comentarios

Vitek VTC-IRE40 Especificaciones Pagina 13