Vitek VT-E4 Manual de usuario descargar pdf (Pagina 22)

DISPLAY : MONITOR

SEQUENCE DWELL : The time that each screen is displayed in a sequence operation.

SPOT-OUT DWELL : The time that each screen is displayed on the spot monitor outputs.

DE-INTERLACE MODE : When recording any channels in D1 resolution (704 x 576) this should be set to

ON to prevent judder during playback.

ALARM POP-UP MODE : When set to ON, an alarm input will cause the associated channel to display

full screen.

ALARM POP-UP DWELL : Determines how long the full screen popup is displayed after an alarm input.

If the alarm condition continues, the popup screen is displayed constantly.

MOTION POP-UP MODE : When set to ON, motion detection will cause the associated channel to display

full screen

MOTION POP-UP DWELL : Determines how long the full screen popup is displayed after motion detection.

If motion continues, the popup screen is displayed constantly

To change any of these settings, highlight MONITOR and press ENTER to select.

Use the CURSOR KEYS to navigate to the option required. Press ENTER to select the option (the cursor

changes to orange) and use the CURSOR KEYS to change the setting. Press ENTER to save the setting

or RETURN to cancel.

Please note: When display modes are changed, the DVR must be shutdown and restarted for

changes to take effect

GENERAL

Click the MONITOR menu and click the ON/OFF

button.

Then click the button for ON/OFF.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 82 83

Sin comentarios

Vitek VT-E4 Manual de usuario Pagina 22