Vitek VT-E4 Manual de usuario descargar pdf (Pagina 51)

PARAMETER continued

Press ENTER. Recording settings for the selected time period are displayed.

During playback, when a particular channel is selected in full screen, the assigned audio channel will

be played back at the same time.

Adjust values as desired, and select OK to finish and return to the parameter menu. Other time periods

can be configured in the same manner.

Remember that if SCHEDULE MODE is set to WEEKLY, recording settings need to be changed for

each day as well as for each particular time.

SIZE : Recording resolutions of 352x288, 704x288 or 704x576 can be selected for each channel.

FPS : Frame rates between 1 and 25 can be set for each channel.

QUALITY : Four different picture recording qualities can be set for each channel.

AUDIO : If audio devices are connected to the DVR, any audio channel can be assigned to any of the

video channels.

The default settings for all channels is 352 x 288, 7FPS, HIGHEST quality.

Note: The DVR supports a maximum recording rate across all channels of 112 frames per second

at 352x288 resolution. As settings are adjusted, the ‘frames available’ at bottom left displays

the number of available frames still remaining and must always be zero or higher.

If, whilst changing recording settings, this figure becomes negative, recording resolutions

and / or frame rates must be lowered to increase the ‘frames available’ value to zero or above.

RECORD

Click the SIZE, FPS, QUALITY and AUDIO value.

Then click the value by button to change.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 82 83

Sin comentarios

Vitek VT-E4 Manual de usuario Pagina 51