Vitek VT-3534 Manual de usuario descargar pdf (Pagina 8)

WEATHER DISPLAY

Check Local Temperature

* Local temperature displays instantly after batteries

are inserted.

Local temperature and humidity readings will alternate

display on the receiver.

Check Remote Temperature

A. Press CHANNEL to toggle between Channel 1, 2, 3 and 4.

Temperature readings will alternate display on the receiver.

C or F Temperature Display

B. Toggle between °C and °F by pressing ALARM/(C/F) in clock mode.

Min and Max Temperature

C. Press MAX in Clock mode to display minimum

temperature record

D. Press MIN again in Clock mode to display maxi-

mum temperature record

TEMPERATURE ALARM

The temperature alarm function allows you to have an

alarm sound if the temperature rises above or drops

below a particular set point.

Local Temperature Alarm

1. Select local temperature alarm mode using SNOOZE/MODE

The symbol will display.

2. Press ALARM/(C/F) to set high temperature alarm ( ),

low temperature alarm ( ) or disable alarm function (blank)

3. Press +/- to set temperature value

4. Press MODE again to finish setting

Remote Temperature Alarm

1. Select local temperature alarm mode using SNOOZE/MODE

The symbol will display.

2. Select channel (1, 2, 3, 4 or local) using CHANNEL

3. Press ALARM/(C/F) to set high temperature alarm ( ), low temperature

alarm ( ) or disable alarm function (blank)

4. Press +/- to set temperature value

5. Press MODE again to finish setting

* When alarm sounds, the sounding channel is displayed,

and or flashes to indicate whether it is the high or low temper-

ature alarm. Press any button to shut off alarm.

ENGLISH

3534.qxd 22.09.2004 15:22 Page 7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sin comentarios

Vitek VT-3534 Manual de usuario Pagina 8